-VX-2000-All-in-one & Separate series
| Type | All-in-one series |
| ||||||
| Lite-20 All | Lite-100 All | Lite-100 All Plus | Lite 20 | Lite 100 | Hyper | Hyper Pro Plus | ||
| Code | 05361/05362 | 05371/05372 | 05381/05382 | 05351 | 05341 | 05311 | 05201 | |
| Price | Open price | |||||||
| Logged
data that can be monitored on a display during and after races. (  --confirmation of min/max values possible ) |
Lap memory | Max 100 Lap | ||||||
| Lap timing(Optical/Magnetic) | Magnetic *7 | Optical/Magnetic *1 | ||||||
| Split times 3 types |  | |||||||
|
RPM |
| |||||||
| RPM bar graph with full scale switching function | × | *2 | ||||||
|
Wheel speed |
| |||||||
| Lateral G | × | (external
G sensor) |
(external
G sensor) |
× *6 |
| |||
|
Temperature × 2ch 0-1000°C |
 | |||||||
| Rotary displacement --Steering movement |
× | | ||||||
| Linear displacement --Throttle position |
× | | ||||||
| Air fuel ratio | × | × *3 |
| |||||
| Pressure × 1ch | × | *8 | ||||||
| Data that can be monitored on a display during races. | Internal battery voltage | |
*4 | |||||
| In-vehicle battery voltage | × |  |
| |||||
| Data that can be monitored on a display after races. | Time | × | | |||||
| Engine running time | | |||||||
| Miles driven | | |||||||
| Cumulative miles driven | | |||||||
| Other functions | Calendar | × | |
× | | |||
| Print with the dedicated handy printer | | |||||||
| Data download | | |||||||
| Data fast download | | |||||||
| Mapping | × | |
× *6 |
| ||||
| Shift lamp timing | | |||||||
| Red line alarm | | |||||||
| Alarm for temperature increase ×2ch | | |||||||
| Alarm for pressure drop × 1ch | × | | ||||||
| Logging auto start/auto off | | |||||||
| Maximum logging time (automatic renewal recording) |
Max 20 minutes | Max 90 minutes | Max 20 minutes | Max 90 minutes | ||||
| Logging rate | 10 Hz | |||||||
| Data within a distance of 0 to 400m | *5 | |||||||
| Data for speeds from 0 to 100kph | *5 | |||||||
| Telemetry | × | |
× | | ||||
| Pit load passing/stopping time | × | |
× | | ||||
| Internal battery | Type | Ni-MH 4.8V | Ni-Cd 4.8V | Ni-MH 4.8V | ||||
| Maximum continuous running time | Max 7 hours | Max 11 hours | ||||||
| Charging time(Quick charge) | Approx. 90 minutes | Approx. 1 hour | Approx. 2 hours | |||||
| AC adapter | AC 100V 50/60 Hz | |||||||
| External DC input power supply(possible to operate with key switch ON/OFF) | × | |
12V | |||||
| Interface | Serial | |||||||
| Display (Standard) |
Size | --- | 150 × 80 × 18mm | |||||
| Weight | --- | 180g | ||||||
| Display (Lite) |
Size | --- | 110 × 66 × 20.5mm | |||||
| Weight | --- | 120g | ||||||
| Control Unit | Size (excluding projection) | 110 × 66 × 25mm | 100 × 91× 35mm | 100 × 126 × 35mm | ||||
| Weight | 225g | 350g | 450g | |||||
| Upgrade | only to Lite-100 All, Lite-100 All Plus | only to lite-100 All Plus | × | only To Lite-100 | × | |
--- | |
| Recommended PC system | Optional serial
communication cable (05287) A PC/AT compatible DOS/V PC with a serial port, or A PC/AT compatible DOS/V PC which can be expanded with a USB-serial conversion connector or a PC card for serial port Minimum configuration: Pentium 150MHz, 32 MB memory, and Windows 98 (or after) is recommended. | |||||||
* 1 If optical sensor is selected when purchasing Lapcom, the TX-100 transmitter is required. Even if a magnetic sensor is selected, the TX-100 and an optical sensor is required on a course that does not support magnetic measurement.
* 2 The full scale RPM bar graph can be switched from MAX11000 rpm to MAX21000 rpm according to the setting of the red line alarm.
* 3 For a vehicle loaded with a A/F controller, NTK TC-6000D, it is possible to display the air fuel ratio by connecting the controller to Lapcom.
* 4 Internal battery voltage can be displayed. When the internal battery voltage drops dramatically, an alarm sounds and the power can be automatically switched off.
* 5 Optional push switch required.
* 6 If the serial number is 1896 or earlier, it is possible to run by installing optional mapping modules.
* 7 Possible to use an optical sensor by modifying Lapcom.
* 8 Percul's pressure sensor was discontinued manufacturing. Please contact us for details.
Possible to run by installing optional sensors.
Possible to run by installing optional board modules.