-VX-2000-All-in-one Series
Data logger and
Display in a compact boxOne piece system makes installation and wiring much easier. With an attached mount panel and screws, it is easy to mount the unit on a steering wheel.
Water ResistantSplashproof construction supports races under wet weather.
Magnetic Lap TimingA magnetic sensor is used to recognize magnetic strips in the course. 
Confirms various data on the multi-display.An easy to read multi-display is fully equipped. Lap and segment times, engine RPM, speed, and temperature x 2 can be monitored on the display. An optional backlight for night races is available.
Shift indicator and various alarm functionsIt is possible to set optional two-stage shift points and an over-REV value. 
Mapping based on driving datat is possible to confirm the vehicle's positional information with mapping, which is displayed on a PC or printed out.
Rechargeable internal battery The control unit is capable of a maximum of about 7 hours continuous running from a quick charge with the attached AC adapter.
Logging up to 6 kinds of dataMost of the measured data can be logged into the control unit for up to 90 minutes. (The logging time of Lite-20 is about 20 minutes.)
Logging auto on/off functionTo log data without any loss, there is a logging auto on/off function.
Extensive data analyzing softwareAnalyzing the race data with the included software, Lapcom Terminal and Lapcom Analysis, can support vehicle setup and improve driving technique. 
Terminal 
Analysis
100 LAP data memoryIf the logging time is exceeded, 100 laps of data are stored in a separate area of memory. MIN/MAX values for lap times, wheel speed, RPM, and temperature can be confirmed on the in-vehicle display or printed out with the optional handy printer.
Printing with the optional handy printerDuring busy pit work, printing data with the special handy printer is very convenient. It is possible to print out values and graphs including MIN/MAX data. 
Histogram |
 |
 |